|
MODULAR FOR EVERYONE NOW!
Welcome to the webshop of tangible waves; take a look at the incredible prices (yes, it's really hardware - no plugins!) Several new modules are under development, so you can expect a growing range of possibilities for AE modular. An updated list what's coming up with a short description and current status you find on the Sunrise page Ideas and wishes for new modules? Please let me know! Any feedback and suggestions is warmly welcome; you are invited to join the AE Modular Forum, use the contact form, via Facebook, or send me an email! We also now have a monthly email newsletter so you can get news in your inbox! Please join using the sign up form. Yours, Robert |
Current wait time is 3 weeks!
(updated 14th January 2019) I am still flooded with orders and although I have improved the production procedure I'm also designing and developing new and improved modules. I will do my best to get the orders out as quick as possible! But, remember, I am a one-man company... Please note:
For buyers outside the EU the shown prices are the final prices; for buyers from EU countries a VAT of 19% will be added during the checkout process. The price including VAT is shown in the description for your information. |
RACKLINK kit (2 modules + cable)
Connect two AE cases with RACKLINK!
The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.
By this, you get the following:
The second case is powered by the first one
All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case
Additionally, there are 8 connections that can be freely used; so it is not necessary to have patck connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 41,65€)
2ENV
ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.
For manual triggering there is a button for each envelope.
CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 42,84 €)
2OSC/d
The 2OSC/d module contains two 1V/octave hybrid oscillators.
Each of them has
- one frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth / Square / Sub-octave output
The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.
The module is designed as a hybrid digital/analog module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analog. It's a new idea/concept that I have implemented here; the design causes the waveform to gets a bit gritty at higher frequencies (but not "digital noise") - it's the charcter of this thing!
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 45,22 €)
SVFILTER
This filter module is a classic state variable filter.
It offers the control knobs cutoff frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to cutofffrequency changes.
Three different outputs provide lowpass, bandpass and highpass output.
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 35,70€)
LOPAG (lowpass gate)
The LOPAG is the lowpass gate module for AE.
It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 33,32 €)
TRIQ164
TRIQ164 is a 4-track, 16-step trigger sequencer.
Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.
For each step in each track a "repeat" can be activated, resulting in repeated triggers within one step. The number of repeats can be selected from one to eight by the REPEAT knob. Additionally, the repeat count can be CV controlled by the REPEAT CV input.
The inputs MUTE 1/2 allow to mute the outputs 1 and 2 by an external signal (e.g. for muting a kick drum)
Each of the 16 steps has a separate trigger output for additional control for certain steps or limiting the sequence length by connecting one of the outputs to the RESET input.
Use it for any kind of rhythmical patterns, typically for triggering drum sounds or evelope generator!
No, it has no pattern load/save features; this will be part of a future, much more complex sequencer. TRIQ164 is designed as improved replacement for the STEP10.
Width: 2U
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 53,55 €)