DISCONTINUED; this module is replaced by the TRIQ164
STEP10 is a trigger sequencer with 10 steps. the clock input advances the step (which is displayed by an LED) and if the position of the switch at the step is "on" then a trigger signal is sent to the output.
The step length can be switched manually between 8 and 10; other cycle-lengths can be achieved by patching one of the step-outputs to the reset input.
Use it for any kind of rhythmical patterns, typically for triggering an evelope generator.
(Price without VAT; for buyers inside the EU 19% VAT will be added to the shown price = 38,08 €)